High Density 88/12 Tungsten Carbide Cobalt
CT2121-2
CT2121-2 is a Tungsten Carbide Cobalt coating applied using the HVOF process. The coating is very dense, very hard, very well bonded and suitable for use in the most aggressive wear environments. CT2121-2 is especially effective in applications where the component is exposed to abrasive media. Use up to 1,000ºF.
Typical Properties
For the Following Applications:
CT2121-2 is used for severe service conditions of abrasive wear, hard surface wear, low temperature erosion and fretting. Typical components coated with this coating are steel mill rolls, paper mill rolls, corrugating rolls, pulp pumps, slurry pumps, concrete block manufacturing wear parts, etc.
Finishing
Finish CT2121-2 by diamond grinding. Flood cool with 2% oil solution. For roughing use 150 grit diamond wheels, work rotation should be 400 SFPM, .080” per pass crossfeed, .0005” per pass infeed. Finish with 400 grit diamond wheels, work rotation should be 400 SFPM, .040” per pass crossfeed, .0005” per pass infeed.
Finishes of 2-4 Ra are possible by grinding. This coating may also be superfinished to a 1 Ra finish.
Specifications
CT2121-2 meets the following specifications: