Nuclear Thermal Spray Coatings

Development and production thermal spray for SMRs, molten salt systems, cobalt-free hardfacing, tritium barriers, and fusion surfaces.
Discuss Your Nuclear Coating Project

WHY CTS

Nuclear coating development with industrial capacity behind it.

CTS is developing coatings with SMR programs and other nuclear applications, including fusion work that needs tritium-resistant and dielectric surfaces. That work sits on a production network already used for power generation, aerospace, oil and gas, pumps and valves, and semiconductor equipment. Coupon development happens in Cincinnati. Production happens across U.S. plants with robotic spray cells, finishing, inspection, and documented quality systems. If a nuclear coating is qualified, CTS can apply it at industrial scale.

Hydrogen Generation

30+

production coating booths

5

U.S. coating locations

ISO / AS9100 / NADCAP

production quality systems

HVOF • Plasma • Arc

industrial spray processes

Hydrogen Generation

WHAT WE COAT FOR

Salt, wear, and tritium.

  • Molten salt corrosion

    Fluoride salt systems, including nickel-fluoride chemistries, attack many alloys. Dense nickel-rich, molybdenum-bearing, ceramic, and graded coatings isolate code materials from the salt

  • Cobalt-free hardfacing

    Valves, seats, slides, and pump surfaces need wear resistance without cobalt activation risk. Nickel and iron systems are sprayed by HVOF, plasma, or spray-and-fuse, then ground to sealing surfaces.

  • Tritium and dielectric

    Alumina multilayer stacks with metallic bond coats serve as tritium permeation barriers and dielectric surfaces for fusion hardware.

INDUSTRIAL CAPACITY

Built to run parts, not only samples.

Production network

Technology Center and production in Cincinnati, Ohio, plus plants in Rocky Point, North Carolina; Springfield, New Jersey; and East Windsor, Connecticut. More than 30 coating booths. HVOF / HVAF, air plasma, twin-wire arc, combustion spray, and spray-and-fuse.

Finish and release

ID/OD grinding of hardface coatings, heat treating, shot peening, and assembly support. Work released under ISO 9001, AS9100, and NADCAP coating quality systems. Path: application review, coupon, prototype part, finish to print, production release.

Hardware: SMR and advanced-reactor salt-wetted surfaces, valves, pumps, wear rings, and fittings. Molten salt loop and storage internals. Fusion tritium barriers and dielectric coatings. Operating nuclear and power-generation refurbishment, including chrome-replacement HVOF.

Hydrogen Generation